Four 4 kW EC fans on one AHU draw about 27.2 A, and the harmonic study for that fan wall ends with a single 25 A active filter module.
The steps in between are the sort of problem our electrical engineers work through. The six-pulse rectifiers inside EC fans put 5th, 7th, 11th and 13th harmonics onto the supply. Even with a DC choke, current distortion typically sits at 35–42%, far above our design target of THDi ≤ 5% at the point of common coupling (IEEE 519-2022 itself sets TDD limits by short-circuit ratio). Sizing the filter means working out how many amps of harmonic current have to be cancelled, with or without chokes, and leaving a margin. For this fan wall that lands on one 25 A module; a wall of eight fans may need two running in parallel.
We are hiring HVAC and electrical engineers in Ho Chi Minh City. HVAC engineers get the same kind of sum on the air side, from coil loads to fan duty.
New engineers start with fundamentals and then learn on live projects, with a skills matrix and an Individual Improvement Plan to show what they have covered.



