Skip to content

Careers

Mentoring happens on the punch list

  • Careers
  • 1 min read

On a punch list walk the item reads 'ceiling penetration sealed', and the contractor has ticked it done.

The junior engineer looks up, sees sealant around the cable tray and agrees. The lead fetches the ladder, lifts the next ceiling tile and shines a torch along the back of the tray. On the side nobody photographs there is a gap you can see corridor light through. The item stays open, and the junior writes up the rejection with the photo.

On the next walk the junior lifts the tile before anyone asks.

The reason arrives a few weeks later, when the room is pressure-tested before qualification. A penetration left open behind a tray is where the cascade leaks, and the failed test turns into a deviation and a retest. Qualification cannot start from an open punch list. An item marked closed that is still open does more harm, because nobody goes back to look.

Humiley grows its own engineers from graduates. The program starts with a 12-month structured internship and continues with mentoring by senior leads on the job, which is where scenes like this one happen.

If you want to learn the trade on site with a lead beside you, our careers page lists the open roles.

Related

More on this subject

What a quantity surveyor does on a GMP project

A cleanroom panel package can be 90% installed and 0% ready for qualification. On a GMP project the quantity surveyor measures from drawings and BIM, keeps the cost plan and prices variations, and earned value needs a second measure, rooms handed over to qualification, to show a shortfall in time.

InsightRead

A commissioning engineer walks each system against the drawings, starts and balances it room by room, sets the pressure cascade and closes the punch list before qualification. It is hands-on, document-heavy and the fastest way to learn how HVAC, controls and validation connect. Our 12-month internship is one way in.

InsightRead