Skip to content

Maintenance Service

Maintenance that keeps the validated state

  • Maintenance Service
  • 1 min read

A terminal HEPA filter is changed on the night shift to clear a high ΔP alarm.

Production restarts in the morning. Nobody has scanned the new filter.

The filter is probably fine. The batch record now depends on "probably". That is how routine maintenance turns into a deviation.

In a GMP facility, maintenance has one job beyond keeping equipment running: keeping the validated state. We structure it around four things.

  1. Criticality bands built from the project's asset register. Direct-impact equipment gets tighter intervals, change control on every intervention and defined post-maintenance tests. Non-GMP equipment is maintained efficiently, without the paperwork overhead.
  2. Planned and corrective work in one system, so a corrective job on a critical asset carries the checks it needs before release back to production.
  3. Periodic requalification and calibration on intervals set by risk, not habit.
  4. 24/7 corrective and emergency response across Southeast Asia under a maintenance agreement, with response times set in that agreement.

Built this way, the night-shift filter change comes with its leak test, its record and its release decision already defined.

If your maintenance plan was written after handover rather than from the design, it is worth a review.

Talk to an engineer: contact@humiley.com · +84 28 7777 6668 (Viet Nam office)

Industries

Related

More on this subject

Central Vacuum Cleaning

In GMP audits, scrutiny often lands on Cleaning Procedures. Using portable vacuum cleaners in cleanrooms is a red flag. Why? Because the exhaust turbulence from a portable unit disrupts laminar airflow and can aerosolize settled dust,…

InsightRead

A single differential gauge across several AHU filter stages cannot say which stage loaded, so teams change everything or guess. A gauge per stage, marked with the commissioning reading and change limit and kept on the calibration list, allows each stage to be changed on condition. BMS transmitters add a trend.

InsightRead