Skip to content

Maintenance Service

Remote monitoring for a GMP maintenance contract

  • Maintenance Service
  • 1 min read

A maintenance contractor's remote view of a GMP plant should be read-only. Setpoint changes still go through the site's change control.

That rule shapes the rest. The site's EMS or validated BMS stays the GMP record, owned by QA, with its own alert and action limits. The contractor's screen sits beside it, and its job is to catch equipment going wrong before a room does.

So its alerts watch the plant behind the room. When the room alarm watches a pressure differential, the maintenance view watches what holds it: supply fan speed creeping up to keep airflow, filter differential pressure rising toward its change point, chilled water arriving warmer than design, a desiccant wheel's regeneration temperature falling. None of those is a GMP excursion yet. Each is a reason to look before it becomes one.

Write the escalation path down before the contract starts. The engineer on duty checks the trend, calls the named site contact, and they agree whether it waits for the next planned visit or someone drives out now. Night access, gowning and who can authorise work in a classified area belong in the same document.

Our maintenance service covers condition monitoring and IIoT trending, with 24/7 corrective response across Southeast Asia under a maintenance agreement.

Where does your site draw the line between a contractor's alert and QA's alarm?

Industries

Related

More on this subject

Four maintenance KPIs for a GMP plant

A single PM compliance percentage hides the overdue task QA cares about. Track PM compliance by criticality, overdue critical tasks listed by name, repeat failures on the same asset, and mean time to restore the pressure cascade from the BMS trend. All four need a CMMS asset register with criticality assessed.

InsightRead