Skip to content

Life Sciences

PQS: the system your SOPs belong to

  • Life Sciences
  • 1 min read

ICH Q10 defines the pharmaceutical quality system, PQS, in one line, and the word "procedure" is not in it.

The line: the management system to direct and control a pharmaceutical company with regard to quality. A site can have five hundred SOPs on the document server and still be unable to show how it directs or controls anything. The SOPs are how the system gets written down.

EU GMP Chapter 1 (2013 text) says a pharmaceutical quality system must be in place, and that it should be fully documented and its effectiveness monitored. Documented is the half that five hundred SOPs take care of.

Section 3.2 of Q10 gives the system four elements: process performance and product quality monitoring, corrective and preventive action (CAPA), change management, and management review. Q10 also names two enablers, knowledge management and quality risk management, and between the two lists sits a section on management responsibility.

That makes a quick test. Pick an SOP and ask which element it serves. The environmental monitoring SOP feeds monitoring; the deviation SOP feeds CAPA. Then ask where the trends from either one are reviewed, and by whom. If nobody can say, the fourth element is missing.

Industries

Related

More on this subject

What makes a SKU in pharma

A SKU is one uniquely identified sellable item: a product in one strength, dosage form, pack size and pack type for one market. One tablet in two strengths, four pack sizes and five markets is 40 SKUs. It is a commercial term, yet each SKU has to match what is registered.

InsightRead

Pharma habits in a battery dry room

In a Li-ion dry room at −60 °C dew point and below, extra air changes do not help: return air often passes back through the desiccant rotor, so more supply air means a bigger rotor and more regeneration heat. Size airflow from the moisture balance; pressure control, airlocks and envelope sealing carry over from pharma.

InsightRead