Skip to content

Life Sciences

A line clearance checklist before the next SKU

  • Life Sciences
  • 1 min read

One leaflet in the wrong language, left in a feeder from the previous run, can end in a recall.

The more SKUs a line packs, the more often it changes over. Each changeover is a chance for something from the last pack to ride into the next: a leaflet, a label reel, a carton with another market's text.

EU GMP Chapter 5 says that before packaging operations begin, steps should be taken to ensure the work area, packaging lines, printing machines and other equipment are clean and free from any products, materials or documents previously used. It adds that the line clearance should be performed according to an appropriate checklist, and leaves the checklist to the site. A workable one:

  1. Nothing from the previous run on or under the line: product, leaflets, labels, cartons, batch documents. Look inside feeders and behind guards.
  2. Printed materials at the line, and the batch number and expiry in the coder, match the packaging order.
  3. Counters are at zero, and the code reader is challenged with a known reject.
  4. Reject bins, sample trays and waste bags are empty.
  5. The operator signs the checklist and a second person checks it before the first unit runs. The second check is practice; the chapter does not ask for it.

For anyone laying out a new line: clearance takes as long as the hiding places allow. Open frames and clear guards shorten it.

How long does a full clearance take on your busiest line?

Topics

Industries

Related

More on this subject

A month-end note from Tony Nguyen, CEO

After more than twenty years with automation vendors and running an EU-GMP EPC contractor, Tony Nguyen saw problems start at the handovers between companies rather than inside any one scope. This note explains why Humiley is organized as one accountable team across design, project management, equipment and maintenance.

InsightRead

A technology transfer package needs the reasons with the recipe

A batch record followed to the letter does not tell a receiving site why each parameter sits where it does. The WHO guideline on technology transfer says the sending unit should make available all the necessary information and knowledge. Check for the development history, the justified control strategy, validated analytical procedures with stability data, and hold time and cleaning information.

InsightRead

An airlock ends at the grade of the room it serves

EU GMP Annex 1 expects the final stage of an airlock to be, at rest, the same grade as the cleanroom it leads into. Into Grade B, that means 3,520 particles of 0.5 µm per m³, terminal HEPA supply, its own pressure step and a place in environmental monitoring, not a transfer grille.

InsightRead