Skip to content

Life Sciences

PQR: what engineering owes the product quality review

  • Life Sciences
  • 1 min read

Once a year QA asks engineering for "the HVAC part" of the PQR, usually with a week's notice.

PQR stands for product quality review. The 2013 text of EU GMP Chapter 1 says regular periodic or rolling quality reviews of all authorised medicinal products should be conducted, with the objective of verifying the consistency of the existing process and the appropriateness of current specifications. Such reviews should normally be conducted and documented annually.

The US counterpart is usually called the annual product review. 21 CFR 211.180(e) does not use the name. It says records shall be maintained so that the data can be used for evaluating, at least annually, the quality standards of each drug product.

Twelve things are on the EU list of what the review should include. One is engineering's by name: the qualification status of relevant equipment and utilities, e.g. HVAC, water, compressed gases.

"Qualified, no change" answers it in three words. A better entry says when each system was last requalified, which changes and deviations touched it during the year, and what the trends of room pressure, water quality and filter pressure drop did.

Who writes the utilities entry in your PQR?

Industries

Related

More on this subject

Annex 1's scope reaches non-sterile plants

The scope of EU GMP Annex 1 (2022) says some of its principles, including the contamination control strategy, may be used for certain non-sterile products such as liquids, creams and ointments. A semi-solids plant that writes a CCS tying room grades, flows, water and monitoring to product risk has an answer for the inspector.

InsightRead

Checks that make a URS line testable

A URS line such as 'the HVAC system shall maintain suitable conditions' cannot be tested. EU GMP Annex 15 (2015) says the URS should be a point of reference throughout the validation life cycle. Five checks make a line usable: one requirement, a unique ID, a number with unit and tolerance, the state, and a named test.

InsightRead

CTD Module 3 describes the plant you are building

The CTD has five modules, and Module 3 (Quality) records the process, its controls and often the facility, including room grades, water grades and the conditions behind hold times. After approval, changing them generally needs a variation. Draft Module 3 and the design basis from one table and send every change to both teams.

InsightRead