Skip to content

Life Sciences

Engineering a sterile compounding pharmacy in a hospital

  • Life Sciences
  • 1 min read

A hospital compounding pharmacy prepares sterile doses inside a building that was designed for wards, not for Grade A air.

The critical zone is well defined. Around the open product the air must meet Grade A: ISO 5 at rest and in operation, no more than 3,520 particles of 0.5 µm and larger per cubic metre. That zone is usually a laminar airflow cabinet or an isolator. Around it, the hospital building pushes back:

  1. The background room. Its grade depends on the guide you work to and on whether you use an isolator. Decide that first; it sets the cost.
  2. The anteroom. Gowning in a space that steps pressure down to the corridor, with interlocked doors.
  3. The pass-through. A pass box for materials, so trolleys from the ward never enter the clean suite.
  4. Pressure and monitoring. Differential pressure shown at the door, recorded, and alarmed at night. Cytotoxic preparation reverses part of the logic, with a negative room behind a positive anteroom.
  5. Cleaning and maintenance access. Smooth, sealed surfaces, and service access to filters from outside the clean zone.

And give it a dedicated AHU. Sharing one with a ward makes the cascade depend on someone else's doors.

Humiley engineers hospital clean zones, including compounding pharmacies, with pressurisation treated as infection control.

What is the hardest constraint your hospital building puts on the pharmacy?

Industries

Related

More on this subject

Four maintenance KPIs for a GMP plant

A single PM compliance percentage hides the overdue task QA cares about. Track PM compliance by criticality, overdue critical tasks listed by name, repeat failures on the same asset, and mean time to restore the pressure cascade from the BMS trend. All four need a CMMS asset register with criticality assessed.

InsightRead

Periodic and event-driven requalification

A new AHU on a running suite moves the pressure cascade, so its event-driven requalification reaches the differential at every door it serves. Change control sets that scope. Annex 1 (2022) separately caps periodic cleanroom intervals at 6 months for Grade A and B and 12 for C and D.

InsightRead