Skip to content

Life Sciences

Rouge classes I, II and III: read the class, then choose the fix

  • Life Sciences
  • 1 min read

Rouge on a WFI loop is a symptom. Its ASME BPE class tells you where it came from, and the source decides whether you derouge or redesign.

Class I is migratory. It forms somewhere else, often at a pump impeller or in a heat exchanger, and travels with the water as particulate that settles downstream. It is orange to red-brown and usually wipes off. Derouging the whole loop without dealing with the source buys time, not a fix.

Class II forms in place. It is often linked to chlorides or other halides attacking the passive layer, and it sits tighter on the surface, darker and harder to wipe. The question here is where the halides come from: feed water, a cleaning agent, a weld that was never properly passivated. Fix that first, then derouge and repassivate.

Class III is the black oxide of hot systems, usually pure steam. It is a stable magnetite layer, hard to remove and quick to come back. Many owners trend it and inspect it rather than strip it on a schedule.

A white cloth for a wipe test, a borescope where the loop allows, and a map of where the rouge is worst will usually separate the three before a sample goes to a lab.

Humiley designs PW, WFI and Pure Steam systems, and when an existing loop comes to us with rouge, the class is the first thing we ask about.

Clean utilities notes

Industries

Related

More on this subject

UHP piping: the pipe is a cleanroom too

High-purity PVDF joined like ordinary plastic pipe leaves fusion beads that trap bacteria, so fab UPW loops use bead-and-crevice-free joints. UHP gas lines add electropolished 316L, orbital welds with coupons, helium leak tests and outlet particle, moisture and oxygen checks. Pharma WFI practice shares much of the discipline.

InsightRead

EU GMP Annex 1 (2022) gives WFI circulation above 70 °C as an example of minimizing the risk of microbial growth. Keeping a loop hot drives the design: ASME BPE dead legs of L/D ≤ 2, turbulent flow to the last user point, planned sanitization and sensors on the return. The CCS should justify all of it.

InsightRead