Skip to content

Life Sciences

ICH Q12: three tools for changes after approval

  • Life Sciences
  • 1 min read

A second API supplier, a wider drying temperature range: sooner or later an approved product needs a change to what its dossier says.

ICH Q12, adopted in November 2019, is the guideline written for that phase of a product's life. It lists eight tools and enablers. Three of them are the ones a plant meets first.

Established conditions (ECs) are the elements of the dossier considered necessary to assure product quality. Q12 defines them as legally binding, and any change to one necessitates a submission to the regulatory authority. For a plant this is the tool with daily use: where a dossier states which elements are ECs, site change control can sort a proposed change by looking it up instead of by debate. Q12 does not make identifying them mandatory, so not every dossier will.

The second tool, a post-approval change management protocol (PACMP), is agreed before the change is made: the company describes the change, the studies and the acceptance criteria, and the authority approves the protocol in advance. The third, the product lifecycle management (PLCM) document, is the central repository for the ECs and their reporting categories.

Q12 says an effective pharmaceutical quality system, as described in ICH Q10, is necessary to support use of these tools, and that the flexibility on offer is subject to the regulatory framework in place.

Industries

Related

More on this subject

ISO Class 1 vs ISO 5: counting at 0.1 µm

ISO Class 1 allows 10 particles of 0.1 µm and larger per cubic metre; ISO 5 allows 100,000 at that size. At that level the installed leak scan must prove frames and grid, not just the U15 filter, single-digit counts need large sample volumes, and airborne molecular contamination needs its own sampling plan.

InsightRead

Knowledge management in ICH Q10, in plain terms

ICH Q10 names knowledge management as one of two enablers of the pharmaceutical quality system: a systematic approach to acquiring, analysing, storing and disseminating information about products, processes and components. In a technology transfer, that means handing over the reason behind each parameter, along with the batch record.

InsightRead

Pharma habits in a battery dry room

In a Li-ion dry room at −60 °C dew point and below, extra air changes do not help: return air often passes back through the desiccant rotor, so more supply air means a bigger rotor and more regeneration heat. Size airflow from the moisture balance; pressure control, airlocks and envelope sealing carry over from pharma.

InsightRead