Skip to content

Life Sciences

Where a plant sits in Module 3 of the CTD

  • Life Sciences
  • 1 min read

The blender in a tablet plant can be part of the product's registration dossier, by type and working capacity.

It sits in Module 3 of the CTD. ICH M4Q(R1) divides the body of data into the drug substance (3.2.S), the drug product (3.2.P), appendices (3.2.A) and regional information (3.2.R). A finished-product plant is written into the drug product branch, under manufacture (P.3), and for biotech products into an appendix as well.

Under manufacture, P.3.1 is where the name, address and responsibility of each manufacturer and each proposed production site involved in manufacturing and testing should be provided. In P.3.3 the guideline says equipment should, at least, be identified by type and working capacity, where relevant, and that in certain cases environmental conditions should be stated; low humidity for an effervescent product is its example.

For biotech products, 3.2.A.1 on facilities and equipment adds a manufacturing flow diagram and the design features that prevent contamination, such as area classifications.

So a blender of another type, a new working capacity or a relaxed humidity condition on site belongs in change control, checked against what the dossier says.

M4Q(R2), released for consultation in 2025, rearranges this structure; the map above is M4Q(R1).

Industries

Related

More on this subject

CTD Module 3 describes the plant you are building

The CTD has five modules, and Module 3 (Quality) records the process, its controls and often the facility, including room grades, water grades and the conditions behind hold times. After approval, changing them generally needs a variation. Draft Module 3 and the design basis from one table and send every change to both teams.

InsightRead

Zero growth and the HVAC record around a media fill

Annex 1 sets zero growth as the APS target, and any contaminated unit fails it. The environmental side of the investigation starts from viable monitoring, with HVAC and EMS trends as support, so review trends before the fill, confirm logging and clock sync, and agree which HVAC events count as interruptions.

InsightRead