Skip to content

Life Sciences

Registration batch: what the term means for the plant

  • Life Sciences
  • 1 min read

Registration batches are made early, often before the commercial line is finished, and their data stays in the dossier for years.

"Registration batch" is site language; "exhibit batch" means the same thing. The ICH stability guideline, Q1A(R2), says "primary batch": a batch used in a formal stability study, from which stability data are submitted in a registration application to establish the shelf life.

Q1A(R2) says data should be provided on at least three primary batches. They should be of the same formulation and packaged in the same container closure system as proposed for marketing, and the manufacturing process should simulate the one to be applied to production batches. Two of the three should be at least pilot scale; the third can be smaller, if justified. Regional requirements on number and scale differ; confirm them for the target market.

The stability data from these batches becomes the basis of the shelf life. If the equipment or the process changes afterwards, someone has to show that the filed data still represents the product. That comparison needs a fixed point, which is the case for making these batches on qualified equipment, at a defined scale.

Industries

Related

More on this subject

Transport verification lives in Annex 15

EU GMP Annex 15 asks for transport of finished products, investigational products and samples to be verified per route, seasons included. The plan is usually sound; the gap is the logger nobody checks before release. Name one role that downloads each logger on time, checks it against limits and can hold the stock.

InsightRead

What ends the life of a HEPA filter

EU GMP Annex 1 (2022) asks for an integrity test of final filters at requalification and puts no age on the filter. A terminal HEPA is replaced when a leak cannot be repaired within site limits, when pressure drop reaches the manufacturer's final value, or after damage or wetting. On glass-fibre media, dust loading alone does not lower efficiency.

InsightRead