Skip to content

Life Sciences

Which parts of a CTD dossier are regional

  • Life Sciences
  • 1 min read

Module 1 of the CTD is not common, and ICH's own diagram labels it "not part of the CTD".

ICH M4 says Module 1 is region specific: application forms, the proposed label, whatever each authority specifies. Modules 2 to 5 are intended to be common for all regions, and common refers to the format: M4 states that it is not intended to indicate what studies are required.

A dossier written for one region travels less well than the name suggests. The ASEAN format is the ACTD: the same kind of content in four parts where the CTD has five modules, with quality as Part II. Inside the quality module, M4Q(R1) keeps a regional section, 3.2.R, with examples marked by region: executed batch records for the USA, a process validation scheme for the EU. Stability is the difference that costs time. The ASEAN stability guideline gives 30 °C/75% RH, Zone IVb, as the general long-term condition for the region. Studies run at another condition for a first market may not support a hot and very humid one, and no amount of writing produces long-term data from a chamber that was set differently.

This is why we ask for the destination market to be fixed in the design basis on day one.

Industries

Related

More on this subject

A month-end note from Tony Nguyen, CEO

After more than twenty years with automation vendors and running an EU-GMP EPC contractor, Tony Nguyen saw problems start at the handovers between companies rather than inside any one scope. This note explains why Humiley is organized as one accountable team across design, project management, equipment and maintenance.

InsightRead

The revised EU GMP Annex 1 has applied since 25 August 2023, with point 8.123 following in 2024. A site still planning its gap assessment is years behind. Most findings land in the CCS, for example a pressure alarm delay set at commissioning that nobody can justify.

InsightRead